> Pt Cruiser
> Pt Cruiser Heated Seats Not Working
Pt Cruiser Heated Seats Not Working
He stated that it is particularly noticeable on Ford Taurus. When the heated seat sensor input indicates the correct temperature set point has been achieved, the heated seat module de-energizes the N-FET which switches off the battery current to the heated Your owners manual should be able to give you more info Mark helpful Your Answer Add photo Photo (optional) Related Questions No heat 1 answer Fan was banging, and I had The radio is not serviceable by the dealer; they will only replace it. check over here
The Wagner MX-841 pads that we recommend using are a top rated pad, which do not require the goo. The time now is 06:45 pm. Nice and quiet now, but still no heat. Each switch contains two light emitting diodes (LED), one for each High and Low setting to let the occupant know that the seat heater system is on.
I would appreciate any thoughts or advice you can provide. Refer to Diagnosis and Testing for the proper heated seat system diagnosis and testing procedures. In addition, the heated seats will automatically return to the Off mode anytime the vehicle ignition switch is turned Off. 853. I have returned to the dealer seven times, to no avail.
Make sure you purchase a 2001 model radio for your car. I have a 2001 LE PT and been having problems with the keyless fobs that came with my PT for some time. I plugged a defective air compressor into my front power outlet and now it does not work. I have a 2002 BE PT.
If it does not, swap spark plugs #1 to #4. If you're a repeat DC car buyer it wouldn't hurt to mention that either. They work excellent when I'm inside the car, but once outside I have to literally stand next to the car in order for them to work. https://www.allpar.com/forums/threads/heated-seats-in-a-non-heated-seat-car.142419/ You won't know what the fix was. 870.
The behavior that you describe has not been reported before, but we have received several complaints from owners who have had problems with this module. 872. I have purchased the replacement gaskets, but have yet to figure out how they come out. You may not exceed 120 amps, if your power is rated at peak-to-peak output. The dealer currently says car performs as others.
Regards Gerrit Question about 2006 PT Cruiser 1 Answer Pt cruiser seat adjuster problems pt cruiser seat adjuster problems - my drivers seat power seat adjuster doesn't work (as of yesterday The total cost for repairs was about $160. 859. I have a 2001 Classic PT with 1.6 /115 HP engine (manual). Show more Language: English Content location: United States Restricted Mode: Off History Help Loading...
The fan turns off when I turn off the car. http://drupaltr.org/pt-cruiser/pt-cruiser-ac-fan-relay.html Owners often sell their OEM PT radios on ebay when they upgrade/replace the OEM headunit, usually at good prices. The braking torque was slightly over 100 ft/lbs., so I replaced the bolts at 100ft/lbs. Transcript The interactive transcript could not be loaded.
- Had bushings, arms replaced.How to remove the alternatormalfunction light stays onCar is heating.
- JerryRigEverything 309,001 viewsNew 5:04 Adding heated seats to 2012 Mazda 5 - Duration: 7:20.
- PT Cruiser Forum heated seat not working LinkBack Thread Tools Display Modes #1 (permalink) 05 Feb 2011, 01:40 am littleshak Fresh Cruiser Join Date: Feb 2011
- I normally run with 38psi in the front and 36psi in the rears, and now run at 40 and 38 and there is no indication of any wheel shake or wiggle.
Thanks. - Staci, from California. This provides an indication to the vehicle operator that the heated seat system is operating and whether the Hi or Lo heat mode is selected. Sign in 402 23 Don't like this video? http://drupaltr.org/pt-cruiser/pt-cruiser-dash-lights-not-working.html At 75K miles, have you cleaned the injectors?
The switch was perfect, the fuse was perfect... If system works, OK repair complete. Thanks much. - Lou, from the USA.
PT Cruiser Forum > General Forums > General PT Cruiser Discussions heated seat not working User Name Remember Me?
JPG Manual Leedavidian_360.jpg. PTDoItYourself.net, and or Daimler Chrysler Corporation are not responsible for errors published on this website. This gooey stuff creates a dampening seal between the caliper piston and the pad. Is this common to PT's?
There are three modes that can be selected with each of the heated seat switches: Off, Low, and High. They are usually more receptive to helping out if the damage occurs just outside the warranty period and if you can demonstrate that it occurred prematurely. The circuit boards are coated in waterproof conformal coating. have a peek at these guys Seats heating but no controls! 0 Report Follow Asked by SJ Sep 30, 2007 at 03:44 AM about the 2007 Chrysler PT Cruiser 4 Dr Base Question type: Maintenance & Repair
The heated seat switches and their LED's cannot be repaired. course it was my fat arse that caused the slip on the wires, they have a cheapo connector and it just came apart. Thanks. - Ed, from USA. I was wondering about my new PT the doors, they still have the plastic drain plugs in the bottom.
There is no mention of a test for transmitter distance, or of an external receiving antenna, it's built into the RKEM. Mark helpful 0 Report wonderwoman_97 answered 6 years ago The switch for the seats is kind of hidden on the left hand side of the driver seat. I would also look at the brake rotors for any signs of warping. I checked the fuses and they appear to be fine.
Sign in 24 Loading... I had to take one of my wife's seats out of her Navigassor to take the cover off and fix this same issue. Available as an option on the Touring Edition and Limited Edition PT Cruiser models, the engine package includes a four-speed automatic transaxle. Related Content2001 Chrysler PT Cruiser Repair and Maintenance2001 Chrysler PT Cruiser Maintenance Schedule2001 Chrysler PT Cruiser Problems(9)2001 Chrysler PT Cruiser Repair Estimates2001 Chrysler PT Cruiser Q&A(245)2001 Chrysler PT Cruiser Recalls(5)2001 Chrysler
The shifting strategy is called 'limp-mode'. However, were told that the 180hp turbo, is the same (220hp) motor. The rear wheel bearing and wheel mounting hub used on this vehicle are a one-piece sealed unit or hub and bearing assembly. crazie.eddie General PT Cruiser Discussions 4 27 Sep 2004 02:59 pm All times are GMT -5.
If they replaced a spark plug and that cured the misfire, why would they replace the wires the next time? Nothing to worry about. Fuse 6 is the height adjuster and 4 is for the heated seats. RepairPal® RepairPal Certified® The following is a compilation of Q&A's submitted by enthusiasts and answered by Ask Motor-Mike and Ed.
This new turbocharged 2.4-liter engine also delivers 210 lb.-ft. (285 N-m) of torque. speedkar99 78,679 views 10:04 Car Seat Heater Installation - Duration: 9:26. Ask the service manager to make them the same. 864. After driving for about 20 minutes I came to a stoplight.