> Peugeot 306
> Peugeot 306 Key Replacement
Peugeot 306 Key Replacement
In the end I disconnected the battery for a couple of minutes then re-connected. Turn the ignition OFF. 6. Posted 3 years ago # Bucko - Member Thanks anyway Andy Posted 3 years ago # brakes - Member great cars. In the end I turned the key to the full position so the glow plugs were going, then disconnected and reconnected the car battery. Source
brettw120-03-2012, 08:46 PM can i buy 1? The wires were then grouped together and insulation tape was used for further protection. With the door removed, it was placed on something soft just to protect the bottom of the door so its paint work isnt damaged. lucas-8724-04-2010, 08:13 PMnot to make you sound silly but is the battery the right way up as I did it when i changed mine iirc dont 306 key fobs have two
Peugeot 306 Key Replacement
If the latter, I suspect something (ignition ring, key transponder etc) is failing or has failed. From May this year, Ebay revised their Downloadable Media Policy & decided to ban all digitally delivered items. sounds like the earlier IR keys as you have to point the key at the sensor next to the coutesy light! Immediately after switching on the ignition, press the large remote button 4.
i've been back there and the key is sending out a signal it seems to need re-programmed and they dont know how to do it. i do still have the code card for teh car thankfully ! Also theres often a push buttong trigger which cuts the electrics in bumps which sometimes triggers with swapping batteries (I think) It should be on the passenger turret somewhere I think. Peugeot 306 Immobiliser Reset The part we are wanting to look at is directly underneath the dark tinted dome.
Open the key and show me a pic. Here is some alternative infomation. It would seem that the only way to make sure everybody sticks to the rules is to make sure that the information is made available to all, so rather than paying Well...
Hold the Plip key close to the central locking receiver mounted in the roof console. 3. Peugeot 306 New Key Fob Posted 3 years ago # Drac - Moderator 1995 shouldn't have any kind of transponder immobiliser. b. Switch on the ignition 3.
- MikeT03-06-2010, 12:20 PMFor the RF remote (different to the IR which has an LED), do you have the immobiliser dash light that has a key symbol?
- Hold the Plip key close to the central locking receiver mounted in the roof console. 3.
- One of the Peugeot forums has a list of people with it by geography.
- If that doesn't work, the remote is likely faulty.
- Turn theignition OFF. 6.
Peugeot 306 Immobiliser
Like Reply | Report as offensive | Link Sat 24 May 2008 20:09 94 1.6 xs key fob not working. - Dynamic Dave You can also point an infra-red device at check over here no... Peugeot 306 Key Replacement Remove the rubber gater and see if you can see any split or broken wires. Peugeot 306 Rf Key Fob Reprogramming Switch on the ignition 3.
On a scanner or 70 cms amateur radio reciever, you should be able to hear a signal from it at about 433 mhz. this contact form Then aim the key fob at the sensor and press the buttons to program it. if so then it would point to a sensor problem or sync problem. Press and hold the button, if it fades after a few seconds replace it. Peugeot 306 Key Fob Battery
The car is a 1996, not a 1995. so im thinking that its a problem with the fob ( which i doubt because iv had a poke around with the volt metre and cant find anything ) or a its not my fault if you set fire to your car Rgds Jon Centuri________________________________________http://www.centuri.net Posted 26th Apr 2007 at 18:07 Profile _Steve_ Senior User Location: Abingdon Registered: 10 Jan 2005 Posts: have a peek here Loading...
i think it might have wiped the code off of it or something ?? Peugeot 306 Keypad Immobiliser Reset Watch Queue Queue __count__/__total__ Find out whyClose KEY FOB PROGRAMMING PEUGEOT 306 & 806(From 98MY) PLIP PROGRAMMING-car key programing baabakgsm gsm SubscribeSubscribedUnsubscribe7,4927K Loading... Posted 3 years ago # andyl - Member 1995 shouldn't have any kind of transponder immobiliser.
as long as its the original key for the car which it obviously is it will work!
ginge19121-03-2012, 09:48 AM what engine is it..?? its just with the rf you cant use and reprogramme second hand keys from fleabay like you could with the IR units as they are chipped so it turns in to Ok first thing I did, was to remove FUSE 14 from the fuse box, but you could here disconnect the battery instead if youre happier. Peugeot 306 Wont Start But Turns Over Purchase a box of matches 2.
The remote type is infra red with an LED on the fob. If you cut this open you will see 3 white wires (and a blue one as well i think) one of these wires will be broken, all you have to do Remote type is Infra red with an LED on the fob. Check This Out Midnightclub24-04-2010, 06:44 PMBasicly i got my 306 last weekend and all is good :) when i got it the guy said the battery in the keyfob needed replacing as it worked
The majority of problems related to Central Locking on PUGs, and anything else electrical linked to your doors comes down to the crap design Peugeot used for the wiring solution. Peugeot told me to turn ignition to position 2 and hold the big button down for 30 seconds then turn the ignition off and it should work. The Infra Red remote is easily recognisable by the clear bulb near the key blade. This was how the guy at the dealership did mine when I had to get a new fob a few years back.
Cheers for the advise but mine is the old style with IR not RF, plus it has a keypad for the immobiliser!! Back to top Re: Remote Central locking issue DAVORED On the Grid Joined: Jun 15, 2009 Posts: 4 Posts Left: 0 Status: Offline What Peugeot do you own?: 306 How did